PC-Logger 3100

•	A/D Converter 16bit A/D converter giving 2 x 25000 divisions on all ranges. The resolution is 0.4mB when using the ±10V range

•	Analog inputs True differential inputs. Input impedance between + and - are more then 400kOhm and min 5Mohm to ground reference

•	Power supply 12 Volt DC makes the PC-Logger simple to connect to battery supply

•	Detachable screw terminals Use the detachable screw terminals to measure on many different places without unscrewing to replace sensors.

•	Calibration All channels are software adjusted. Adjusting constants are stored in the logger and used to calculate the measurements. No oldfashioned potentiometers to adjust logger response.


	•	Technical data (HTML)

	•	Technical data (pdf)


	•	Wall bracket
	•	Screw terminals
	•	Mains adapter
	•	Field recording station
	•	Modem
	•	GSM Module


	•	Swedish pdf (621k)

	•	English pdf (798k)

PC-Logger 31000-usb

Load modules Compare CE

PC-Logger 31000-usb
High precision data logger with 8, 16 or 24 analog channels. Advanced technology together with low power makes the logger perfect for all types measurements. Several options for even more flexibility are available.

Options

			Software Windows program for your recordings. Setup and offload recordings in a easy way. Analyze data in different ways. Make professional reports. Read more.

			Channels 8, 16, 24 Choose between 8 ,16 or 24 channels depending on your requirements. To get the most out of your logger we recommend that the option "Software range switching" be added.

			Software range switching Match the signal from your sensors and select the input range. Use your computer to select the range. Available ranges are: ±10V, ±1000mV, ±100mV, ±50mV, 20mA and thermocouples

			Display and 64kByte memory This is a must for the logger when you want to make off-line recordings. The memory can hold more than 30 000 values. For example, measure with 4 channels each 5th minute and the memory will hold a 28 days long recording. Use the "Multimeter" on the logger when connecting transducers. Every value stored uses two bytes.

			Expansion memory If you want to do long recordings, you may need an expansion memory. The memory is available in two sizes: 512k or 1Mbyte. Every value stored uses two bytes.

			Digital card, Pulse counters For use as status inputs or pulse counters. 8 digital status inputs together with 4 relay outputs makes this card very flexible. With the option "Pulse counter" you will have 6 counting channels.

			Jack panel Quick and safe. Change transducers simple. The jack panels are configured to your requirements.

			Constant current sources For use with resistive sensors like Pt-100 or similar. Output is 0.500mA Available in three different versions 8, 16 or 24 time multiplexed outputs. Time multiplexed outputs means that self heating of transducers is non-existant.

			Modem port Use this option together with a modem or a GSM module for reading offline data without leaving the office. For best result, use it together with EasyCall to schedule offloads.